Moku:Pro’s Data Logger
Compare all data loggers
Overview
Moku:Pro’s Data Logger enables you to log data to its 120 GB internal solid state drive with sampling rates of up to 1 MSa/s. Four inputs are equipped with dual 10-bit and 18-bit ADCs. With our blended ADC technology, input noise is measured at 30 nV/√Hz at 100 Hz, providing ultra-low noise data logging from acoustic to RF frequencies. Moku:Pro is also equipped with a 10 MHz clock synchronization I/O, and four 500 MHz outputs, allowing flexible integration with other electronics.
Specs
Input channels
4
Input range
0.4 Vpp, 4 Vpp or 40 Vpp
Input coupling
AC/DC
Input impedance
50 Ω / 1 MΩ
Output voltage
Up to 10 Vpp into 50 Ω (20 Vpp into 1 MΩ)
Maximum acquisition rate
1 MSa/s with 4 channels enabled to SSD
Minimum acquisition rate
10 Sa/s
Acquisition mode
Normal:
• Direct digitization at the acquisition rate
Precision mode:
• Downsampling from maximum sampling rate by averaging
Key features
Ultra-deep memory depth for long-term logging
Log voltage data on four independent channels to its 120 GB SSD
Advance scheduling
Schedule a log to start after a delay of up to 10 days
Onboard Waveform Generators
Built-in, four-channel 500 MHz waveform generator
Multiple export options
Easily export data to computer, Dropbox, and other cloud-based services
Applications
Temperature monitoring
Vibration analysis
Environment monitoring
Other sensor data recording
Documentation
Specs
Datasheet
User Manual
App Note
Strain gauge data logging
Intuitive software and API integration
Moku: app for iPadOS provides a clear and dynamic user experience, making configuring, modifying, and debugging your setup easy.
API integration with Python and MATLAB allows straightforward automation of Moku:Pro in complex setups or for repetitive tasks.
Try the softwareIntegrated waveform generators
Generate waveforms on Moku:Pro’s four output channels while using the Data Logger. Select from 5 different basic waveform shapes and generate waveforms of up to 500 MHz bandwidth.
Ultra-low noise made possible by Blended ADCs
Moku:Pro’s analog front-end is equipped with a 10 MSa/s, 18-bit ADC and a high-speed, 5 GSa/s 10-bit ADC. Using the power of the FPGA, the system combines the information from the ADCs to provide class-leading input noise performance over the entire 600 MHz bandwidth, from acoustic to RF. Our innovative blending algorithm ensures that the signal-to-noise ratio is optimized across all Fourier frequencies without impacting latency, or signal bandwidth.
Available on Moku:Pro hardware
Our most powerful hardware platform to date, Moku:Pro harnesses the power of a Xilinx Ultrascale+ FPGA with higher bandwidth, lower noise, more channels, and more output power than ever before.
Like Moku:Pro’s Data Logger?
View pricing Learn about Moku:Pro hardware
Or compare all hardware platforms
